Kailasa Temple in Ellora Caves

0

Kailasa Temple, Ellora as Wonder of all the Wonders of World

When you watch Kailasa Temple, and look at the design and amount of work put up in its construction, you will unknowingly yell. Is it possible for the human being to construct something like this on the earth ? It is the bi partition attitude of historians who have neglected this marvelous piece of human creation and did not fit it to include it in the list of wonders of world.
Kailasa Temple
Kailasa temple is a 1200 year old Ancient Hindu Temple Carved out of a single rock in Ellora 

The Kailasa Temple is an ancient Hindu temples located in Ellora, Maharashtra, India. It is made by using rock-cut technology. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna-I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. The beauty and the most astonishing part of this architecture is its megalith carved out of one single rock. It is said that it took more than 100 years to construct this temple.

Kailasa Temple in Ellora
The Kailasa Temple is notable for its vertical excavation—carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archaeologists could conclude that three types of chisels were used to carve this temple.

Kailasa Temple for Lord Shiva

All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
Elephant in Kailasa Temple
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard of Kailasa Temple. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.

Reference: John Julius Norwich – Great Architecture of the World

You might also like More from author

Leave A Reply

Your email address will not be published.